Truck Mount Trailers & Recovery
New and Used Truck Mounted Trailers and Vans
800-707-0037
New and Used Truck Mounted Trailers and Vans
800-707-0037
Your connection to used and nearly new units
Call us today at 540-266-2065 or 800-707-0037
Call us today at 540-266-2065 or 800-707-0037
 Click the sticker above to go to our training page. |
Welcome
Dirty Grout Members! As supporters of dirtygrout.com, we are always looking for ways to help out our fellow members. This page was created especially for DG members. |
 |
When we began this project, we set out to do two things:
1- build a truckmount that is designed for hard surface cleaning FIRST and carpet and extraction second
2- make it simple.
As owners/operators of both hard
surface and carpet cleaning companies, we knew we had a large task in
front of us and we knew the trail of substandard units behind us was
long. With the current systems we owned, we struggled on a daily basis
to keep the temperatures up and the equipment running. We knew there
had to be a better way.
The first part was not difficult to accomplish. The second, proved to be a lot of work. We knew we needed experience on our team so we sought out a truckmount builder/designer with over a decade of success that has designed, produced and sold over 1000 units.We poured over the design from every angle and came out with the best of the best. The new Hotshot series is designed with service in mind. Every proprietary part possible was eliminated in favor of parts and units that are readily available, not just in the US, but in many other nations as well.
The first part was not difficult to accomplish. The second, proved to be a lot of work. We knew we needed experience on our team so we sought out a truckmount builder/designer with over a decade of success that has designed, produced and sold over 1000 units.We poured over the design from every angle and came out with the best of the best. The new Hotshot series is designed with service in mind. Every proprietary part possible was eliminated in favor of parts and units that are readily available, not just in the US, but in many other nations as well.
We started with the world renowned Kohler engine.
With over 10,000 authorized service centers in the US alone, service is
just a phone call away. The addition of the reliable workhorse 3L
blower from Sutorbuilt and General Dynamics' Emperor
series high pressure pump add to the high quality components. The 65
gallon stainless recovery tank was combined with our electric diaphragm
pump to create a
great capture and release water system with automatic pump out. But we didn't stop there, the heat exchanger on the 3L-25 model is unique in the industry. Its multi-stage heat exchanger was built specifically for this system. And for those that desire maximum heat on demand, the 3L-18P propane fired model has
the latest technology in high pressure, high heat and temperature
control providing constant high heat at increased flow rates that the
carpet cleaner truckmounts have ignored for years. While eliminating
unnecessary pieces and parts we still did not ignore safety and ease of
operation. Our systems provide not only safety checks, but backup
safeties should the primary systems fail to function, something not
found in most systems today. No matter which you choose, the Hotshot is
ready for action!
great capture and release water system with automatic pump out. But we didn't stop there, the heat exchanger on the 3L-25 model is unique in the industry. Its multi-stage heat exchanger was built specifically for this system. And for those that desire maximum heat on demand, the 3L-18P propane fired model has
the latest technology in high pressure, high heat and temperature
control providing constant high heat at increased flow rates that the
carpet cleaner truckmounts have ignored for years. While eliminating
unnecessary pieces and parts we still did not ignore safety and ease of
operation. Our systems provide not only safety checks, but backup
safeties should the primary systems fail to function, something not
found in most systems today. No matter which you choose, the Hotshot is
ready for action!Propane or Heat Exchanger?
Years
ago, propane fired units were the norm. In recent years, in the carpet
cleaning industry, the heat exchanger unit has been making a big
splash. This is great for those that use low flow rates at low
pressures or for those in tropical climates. But what about those of us
that need both high heat and high flow rates? The answer, return to
propane fired units that have the ability to handle high pressure and
can generate enough heat to maintain sanitizing temperatures at OUR
flow rates. Think of it this way, gas or electric water heaters in our
homes provide hot water on demand, as long as we limit the demand. The
problem is the recovery time needed to heat the entire tank again. The
same problem exists with truckmounts. Getting the water hot is not
difficult. Almost anyone can claim high temperature ranges, 
but
sustaining them is another story. We teamed up with one of the
countries best manufacturers and designers of propane water heating
coils and systems. Through this association, we can now provide units
that not only attain hot water temperatures (over 250 degrees) but we
can maintain those temperatures at hard surface cleaning flow rates.
The proper way to quote attainable temperatures is not to quote a
temperature but rather to quote the amount of rise above the input
water temperature. One part of the country might have input water
supplies at 72 degrees while another might be as low as 40 degrees. 32
degrees can make a difference in the output temperature as well. Our
heater system is designed to gain a minimum of 190 degrees (F) above
the input temp. This makes it possible to provide sanitizing
temperatures even in the coldest of climates. And the good news, we do
this at flow rates of 2.5 gallons per minute or more!
However, if you prefer heat exchangers to propane, you've still come to the right place. Our 3L-25 HX unit can give you lots of free heat if you prefer not to use propane. Our tests have shown an average rise of over 120 degrees above input water temp at flow rates of 2.5gpm.
With the best truckmount built for hard surface cleaning, we just had to have the best
trailer to
install it in! We partnered with a long standing trailer manufacturer
to build the trailer to our exacting standards. The result is a unit
designed by end users that considers how you use your unit and makes
your daily tasks much easier. As an example, i was tired of standing in
the rain and inclimate weather when setting up and monitoring the
truckmount. So we designed a flip up rear door instead of the
traditional barn doors. When it's open, it makes a great rain canopy.
And it's set to stop short of 90 degrees so all the rain runs off the
back and not into your face or down your back. We also added more
storage and specially designed storage rails to make organization
easier. We lined the floor with tough, one piece rubber tread plate to
make traction better and clean up easier. You'll find many features
that were designed with the end user in mind.
Come see a demo, you'll understand.
In addition to truckmounts, we also provide a business ready package that includes:but
sustaining them is another story. We teamed up with one of the
countries best manufacturers and designers of propane water heating
coils and systems. Through this association, we can now provide units
that not only attain hot water temperatures (over 250 degrees) but we
can maintain those temperatures at hard surface cleaning flow rates.
The proper way to quote attainable temperatures is not to quote a
temperature but rather to quote the amount of rise above the input
water temperature. One part of the country might have input water
supplies at 72 degrees while another might be as low as 40 degrees. 32
degrees can make a difference in the output temperature as well. Our
heater system is designed to gain a minimum of 190 degrees (F) above
the input temp. This makes it possible to provide sanitizing
temperatures even in the coldest of climates. And the good news, we do
this at flow rates of 2.5 gallons per minute or more!However, if you prefer heat exchangers to propane, you've still come to the right place. Our 3L-25 HX unit can give you lots of free heat if you prefer not to use propane. Our tests have shown an average rise of over 120 degrees above input water temp at flow rates of 2.5gpm.
With the best truckmount built for hard surface cleaning, we just had to have the best
trailer to
install it in! We partnered with a long standing trailer manufacturer
to build the trailer to our exacting standards. The result is a unit
designed by end users that considers how you use your unit and makes
your daily tasks much easier. As an example, i was tired of standing in
the rain and inclimate weather when setting up and monitoring the
truckmount. So we designed a flip up rear door instead of the
traditional barn doors. When it's open, it makes a great rain canopy.
And it's set to stop short of 90 degrees so all the rain runs off the
back and not into your face or down your back. We also added more
storage and specially designed storage rails to make organization
easier. We lined the floor with tough, one piece rubber tread plate to
make traction better and clean up easier. You'll find many features
that were designed with the end user in mind. Come see a demo, you'll understand.
- Hotshot Truckmount (can be trailer or van mounted)
- Multi-surface trailer package including tools and accessories
- Two day tile and grout cleaning class
- Two day sales training class
- Marketing CD with start up files for ads, business cards, flyers, trifolds and more
- Websites for your new business
- Search Engine Optimization Services
- Trailer or van wrap services
- Equipment training
- 24/7 technical support
Check out the specs here and give us a call. We'll be happy to answer your questions.
